The service and utility vessel "Mercury" (project 20221A) and a cargo-passenger barge (project 272023) were launched at the production site of the Livadia Ship Repair Plant in the Primorsky Territory. This was reported in the press service of the Russian Maritime Register of Shipping.
The barge is being built by order of the Ministry of Transport and Road Facilities of the Primorsky Territory. The vessel is designed for the transportation of deck cargo, vehicles and passengers. It can be used as a ferry within a 20-mile coastal zone with a flight duration of up to 24 hours.
Characteristics of vessels of project 272023:
- Length - 27 m
- Width - 6 m
- Draft - 1.2 m
- Main engine power - 2 x 220 kW
- Capacity - up to 30 passengers
The service and utility vessel "Mercury" will be used in the Kamchatka Directorate for Technical Support of Supervision at Sea. The vessel is suitable for environmental protection measures, environmental monitoring of water areas, and hydrographic works.
Characteristics of vessels of project 20221A:
- Length - 19.85 m
- Width - 6.5 m
- Draft - 1.5 m
- Main engine power - 2 x 368 kW
Also, the shipbuilders of the Livadia Ship Repair Plant are building a high-speed passenger catamaran on underwater wings of project HSC 200, a self-propelled barge of project 20220A, a car-passenger ferry of project 03770, as well as a floating dock of project LRZ2023PD.
Read more on the topic:
New high-speed catamaran "Sarma" launched on the route along Lake Baikal
The second passenger ship of the "City Cruise" project has been handed over to the customer
Now on home
Netizens believe that UAVs are better replaced by thousands of small satellites at an altitude of 200 km
Likhachev: We are ready to offer Serbia the entire range of our projects
Fraudsters have learned to imitate the interface of a bank and payment system
The truck can operate as part of road trains weighing up to 100 tons
Work on the high-speed maglev body has already begun
The first stages of the program are planned to be completed by 2032
Recovery teams are working at the scene
The fifth prototype was accelerated to 190 km/h at an altitude of 300 meters
Over the past two years, the growth rate in this segment has been at 15%
Experts got acquainted with the key objects of the experimental base and advanced methods of certification flights
In annual reports, parliamentarians willingly share statistics from their channels
The university is also working on creating robotic manipulators and robotic welders