Rostselmash presented a new model of the RSM 2405 tractor at the Kazan Agro 2025 exhibition. It is equipped with a domestic KAMAZ engine.
The P6 engine with a nominal power of 405 hp (maximum - 433 hp) is adapted for use in Rostselmash 2405 tractors to achieve maximum performance, low fuel consumption and low noise levels. This is a 6-cylinder in-line engine with a turbocharger with a volume of 12 liters.
One of the key features of the engine is a two-stage filter with a manual priming function, which includes a filter-separator (for coarse cleaning) and a fine filter with fuel heating. This makes it easier to start the engine in cold weather.
The tractor is also equipped with a comfortable cabin with a comfortable operator's seat, a color touch monitor and climate control. Axles with differential lock provide excellent cross-country ability, and fuel tanks with a total capacity of 927 liters contribute to even weight distribution on the front and rear axles.
The tractor is equipped with a 12F+4R mechanical transmission with three speed ranges. This allows you to smoothly switch between four synchronized speeds in each range.
The closed-center hydraulic system provides a maximum hydraulic flow of up to 260 l/min. The rear linkage is designed for coupling with IVN and III category implements, with a lifting capacity of up to 5,897 kg at a distance of 610 mm from the axis of the lower link suspension.
Earlierwww1.ru reported that the legendary Vladimirets tractor will berevived in Russia.
Read materials on the topic:
"DST-Ural" presented a project of the FT-741 agricultural tractor
Alikhanov was shown the first Russian AI robot tractor from Cognitive Pilot
A technical vision system for unmanned tractors and dump trucks was developed in Veliky Novgorod
Now on home
Netizens believe that UAVs are better replaced by thousands of small satellites at an altitude of 200 km
Likhachev: We are ready to offer Serbia the entire range of our projects
Fraudsters have learned to imitate the interface of a bank and payment system
The truck can operate as part of road trains weighing up to 100 tons
Work on the high-speed maglev body has already begun
The first stages of the program are planned to be completed by 2032
Recovery teams are working at the scene
The fifth prototype was accelerated to 190 km/h at an altitude of 300 meters
Over the past two years, the growth rate in this segment has been at 15%
Experts got acquainted with the key objects of the experimental base and advanced methods of certification flights
In annual reports, parliamentarians willingly share statistics from their channels
The university is also working on creating robotic manipulators and robotic welders