Ruselectronics presented a new single-board computer based on Elbrus processors

The embedded single-board computer for industrial use in a frameless design weighs only 100 g

At the "Microelectronics 2024" forum, INEUM named after I.S. Brook (part of the Avtomatika concern of the Ruselectronics holding of the Rostec State Corporation) presented a Russian single-board computer based on Elbrus processors. It is designed for use in various industries and critical infrastructure facilities.

The MP21 module (TEGR.467144.004) based on the Elbrus-2C3 processor is made in the Com Express Type 6 Compact form factor (95×95 mm). It is an embedded single-board computer for industrial use in a frameless design for use as a mezzanine, installed on specialized carrier boards.

MP21 is a processor core with integrated peripheral interface controllers and a video controller, soldered RAM, and an integrated solid-state drive with a capacity of 60 to 480 GB (the drive is optional).

The module can be supplied with a heat-spreading plate that transfers the generated heat to the cooling structures of the customer's product.

The Elbrus-2C3 processor's integrated graphics core allows the module to be widely used in information display systems.

Main technical characteristics of MP-21:

processor 1891VM068 (Elbrus-2C3), 2 cores, clock frequency not less than 1600 MHz;
RAM ― one channel DDR4 SDRAM with ECC, 8 GB (optionally 4 GB), soldered;
video ― two HDMI (resolution up to 4096x2160 60Hz), two-channel LVDS (resolution up to 4096x2160 30Hz);
hardware acceleration DirectX 10, OpenGL 3.2, OpenGL ES 3, Vulkan 1.0, OpenCL 1.2, OpenVX 1.x;
hardware acceleration of VP9, H.264, H.265, VC1, MJPEG encoding/decoding;
2 Ethernet channels 10/100/1000 Mbit/s (second channel via additional connector XP1);
8 USB 2.0 ports with HS, FS and LS speeds support; 4 USB 3.0 ports;
2 SATA 3.0 ports;
2 UART ports (LVTTL level);
SPI interface;
I2C interface;
SMBus interface;
PCI Express 3.0 interface*;
audio input/output ― HDAudio;
8 general purpose input/output lines (IO);
real-time clock with the possibility of power from an external lithium battery;
watchdog timer ― internal, with software control;
power supply from a 12V DC source or +12V/+5V_SB;
module interface ― COM Express Module Type 6;
power consumption no more than 40 W;
operating temperature from minus 40 to plus 55 °С;
overall size 95x95 mm; form factor COM Express Type 6 Compact;
weight no more than 100 g (without heat-spreading plate).