The "Mezhgosmetiz-Mtsensk" enterprise in the Oryol region is again producing welding materials for electric arc welding: solid section wires with a diameter of 0.8 to 5.0 mm, coated electrodes with a diameter of 2.5 to 5.0 mm, and flux-cored welding wires.
The regional publication "OrelTimes", referring to the "First Regional" TV channel, writes that 140 people have returned to the plant. Throughout the forced downtime, the company paid salaries to these people. With the opening of production, the process of restoring the customer base began, orders appeared, and it was possible to increase employee salaries by another 50%.
It is known that JSC "Mezhgosmetiz-Mtsensk" was formed in 1999 on the basis of the "Mtsensk Plant of Textile Engineering", after which equipment was purchased for the production of welding electrodes and wire, and production began.
In 2010, the enterprise became part of the US group of companies "Lincoln Electric", then on the site of this holding it was consolidated with JSC "Severstal-Welding Materials". Technical equipment was purchased for the production of flux-cored wires. In the spring of 2022, "Lincoln Electric" announced that it was leaving Russia, and "Mezhgosmetiz-Mtsensk" came to a standstill.
As noted in JSC "Mezhgosmetiz-Mtsensk", the enterprise left "Lincoln Electric" in 2024, and now a"new page" begins for it.
Read materials on the topic:
The world's largest Russian research reactor MBIR received a heat exchanger from the Baltic Shipyard
Production of ESC and ABS systems will begin at the former Robert Bosch Samara plant
"To live the next five years and not collapse": the deficit of funds of the USC was named
Now on home
Netizens believe that UAVs are better replaced by thousands of small satellites at an altitude of 200 km
Likhachev: We are ready to offer Serbia the entire range of our projects
Fraudsters have learned to imitate the interface of a bank and payment system
The truck can operate as part of road trains weighing up to 100 tons
Work on the high-speed maglev body has already begun
The first stages of the program are planned to be completed by 2032
The fifth prototype was accelerated to 190 km/h at an altitude of 300 meters
Over the past two years, the growth rate in this segment has been at 15%
Experts got acquainted with the key objects of the experimental base and advanced methods of certification flights
In annual reports, parliamentarians willingly share statistics from their channels
The university is also working on creating robotic manipulators and robotic welders