Ещё один шаг к запуску энергоблока №1 АЭС «Руппур»: атомщики продули паропровод в турбинном отделении

Steam at a temperature of 200 °C was supplied under a pressure of 2.0 MPa

Nuclear scientists continue to prepare power unit No. 1 of the Rooppur NPP in Bangladesh for launch. Workers have completed the purging of fresh steam lines in the turbine hall. This was reported by Rosatom.

Rooppur NPP in Bangladesh
This is one of the key stages of the cold and hot run-in of the power unit. The purging was carried out using fresh steam under a pressure of 2.0 MPa and a temperature of 200 °C.
Rosatom Press Service

Then the workers will perform a repeated purge, increasing the volume of steam. In this way, they will completely clean the lines and check the operation of the equipment under a load close to the operational one.

Alexey Deriy, Vice President for Projects in Bangladesh at Atomstroyexport, stated that this is an important stage of commissioning works at power unit No. 1.

In the future, the Rooppur NPP, built according to the latest Russian VVER-1200 project, will provide up to 10% of Bangladesh's clean energy for decades to come.
Alexey Deriy, Vice President for Projects in Bangladesh at Atomstroyexport

Earlier, Rosatom began hot run-in of the VVER-1200 reactor.

Read also on the topic:

Will not be ready by the end of 2025: the commissioning date of the first power unit of the Akkuyu NPP has been postponed

The largest nuclear construction site in the world is in full swing: concreting of the walls of the turbine building of power unit No. 3 of the Akkuyu NPP has been completed

Beloyarsk NPP is modernizing power unit No. 3 with a BN-600 reactor