At Perm Polytechnic University, a method has been developed for calculating the optimal parameters for well operation to achieve high efficiency in hydrocarbon production. Incorrectly selected well operation parameters can reduce their productivity to only 15%. However, the PNRPU development will help oil workers recover the 85% of oil or gas that is lost due to incorrectly set parameters for wells, through accurate calculations.
Research within the framework of the "Priority 2030" program has proven a direct correlation between the formation of reservoir depression and the well's productivity coefficient.
One of the most common methods for creating hydrodynamic communication between the reservoir and the well is cumulative perforation, during which a perforator is lowered into the well on an electric cable. The explosion from its charges forms a directed jet that creates channels. The difference between the fluid column pressure in the well and the reservoir pressure is called depression. The disadvantage of cumulative perforation is that it changes the stress-strain state of the column, cement stone, and reservoir rock near the created channels. This leads to a decrease in the permeability of rocks and the productivity of the well as a whole.
To study the effect of cumulative perforation on rock permeability and the likelihood of weakened or destructible areas appearing, PNRPU conducted numerical modeling of the near-wellbore zone. The well model included a sample of the production string, cement stone, and a section of reservoir rock with perforation holes.
It turned out that in the process of increasing the difference between reservoir and bottomhole pressures on the formation, destruction from tensile stresses decreases. At a depression value of 9 MPa, such zones completely disappeared, and areas of destruction from compression increased.
We found that when the depression on the formation is increased to 12 MPa, the maximum decrease in the well productivity coefficient can reach 15%, which indicates the need to find the optimal operating mode for a production well.
Researchers hope that the numerical model they have developed will help improve the selection of an effective operating mode for oil and gas production wells in Russia.
Read materials on the topic:
Новая российская технология нефтедобычи позволяет быстрее бурить скважины до 4 км
Россия впервые применила при нефтедобыче разработку производителей «Тополя» и «Ярса»
Нейросеть «Газпрома» нашла новые запасы нефти в Ханты-Мансийском автономном округе и Томской области